Weight | N/A |
---|---|
Dimensions | N/A |
Quantity | Box of 50, Bulk Box of 500 |
Peterson 6.5 Creedmoor SRP Match Grade Brass
$51.00 – $445.00
The 6.5 Creedmoor SRP (Small Rifle Primer) Cartridge is manufactured on Peterson Cartridge’s new, state-of-the-art case line which uses cutting-edge technology to produce some of the most precise and consistent casings on the market. Peterson Cartridge Co is committed to producing Match-Grade Brass that enables our customers to get more reloads per casing than industry average.
Additional Information
If you plan to load above SAAMI max pressure and are concerned about primer-pocket leak, Peterson recommends you try their 6.5 Creedmoor Small Rifle Primer. While they do not suggest loading over SAAMI max pressures, Peterson’s small primer pocket 6.5 Creedmoor have proven to hold up over SAAMI max pressures when tested in their universal receiver.
*Note: All of our SRP casings feature a small flash hole in the diameter of 0.060” vs. the 0.080” flash hole found in our LRP casings. This means you will need an X-small/ Undersized Decapping Pin to deprime our casings.
Warning: Only use Peterson Cartridge Co. casings in firearms in good condition, designed, marked, and chambered for this cartridge. Do not use Peterson Cartridge Co casings for “fire forming” or any other purpose other than what they were designed and tested for. Peterson retains no responsibility for the enclosed casings if they are used outside of the manufacturer’s recommendations.
Many competitive shooters prefer Small Rifle Primer pockets (SRP) because they experience longer primer pocket life due to the increased material in the head of the case. There is also a belief that Small Rifle Primers produce a more consistent ignition. Some people even report better groupings and lower velocity spreads.
However, SRP are not recommended for shooting in extreme cold or hot temperatures. And Small Rifle Primer Brass sometimes requires the firing pin on your gun to be bushed. This depends on your rifle and your bolt. If that is not done, you risk getting pierced primers. For more information on bushing your firing please watch this YouTube video https://www.youtube.com/watch?v=-CDJKLp7BsI.
To make sure you don’t have any problems talk to your gunsmith and understand what your rifle is set up for before using SRP brass. Doing that will make sure your reloading and shooting experience is much more enjoyable.