Search results

This is more than likely the problem. Maybe try the same primers in different brass to rule this out if possible.

Thanks for the test @T_the_Tinkerer ! I made the switch in my 223 from IMR 3031 to benchmark and I will sleep better knowing that any day of the year my load will be consistent.

Welcome from western Pa. I’m new to the hammer’s and the forum also and have found everyone very helpful. As @littlebighorn mentioned you can look at the reloading section for some data to get you started with your bullet and powder choices.

Quite impressive for a 60 grain bullet. Good shooting!

I ended up settling on a load of 28.2 grains of the benchmark at 3715 fps with a group about .75 at 100 yards. Easy peasy

Thanks And I thought my cashew addiction was expensive!

Thanks for the late welcome Rich and your apology is accepted. TD

Remington 700 223 Remington 24” 1:12 twist 44 grain hammer hunter COAL 2.190 Remington 3X fired brass Primer - CCI br-4 SRP Powder- Benchmark 26.5 @ 3485 fps 27 @ 3613 fps 27.5 @ 3672 fps 28 @ 3704 fps 28.5 @ 3736 fps slightly compressed Note - no sign of pressure. Settled on 28.2 grains @ 3715 fps

I sure hope that he’s able to what it sounds like a lifelong dream of getting his desert sheep. Sometimes we forget about the little things that we are fortunate to be able to do in this country and life in general.

Hello all, I just got back from the range. I decided to take @T_the_Tinkerer advice and I pulled the bullets and dumped the IMR 4198 and replaced it with 28.2 grains of benchmark. Happy with the results. About a .75 5 shot group at 100 yards with a velocity of 3715 fps. I will load up the...

Thanks, I really like a target that has a area for noting all data instead of me scribbling all over it.

These are the first monos that I have loaded up. I’ve only been reloading for about 10 or so years and decided I would dip my toe into the hammer rabbit hole with my 223. I was pleasantly surprised when I seen that there was bullets available for my 1:12 twist. Hard to tell which of my rifles...

With your good advice you can call me anything you like but please don’t call me late for dinner. 😁 Thanks again your advice is appreciated

Thanks T. I hope it’s ok to call you T? I loaded up some with the 4198 to try but I really like and agree with your assessment of the benchmark load. You have me thinking about just pulling the bullets and going back to work with the benchmark. I’m plenty happy with 3700+ fps and doubt I’ll be...

I sure wish that I could shoot the heavier HH from my Remington 700 223. I’m relegated to shooting the 44 grain which may be a little light for deer. Very impressive performance!

Thanks joe. I was leaning towards just going to the IMR 4198 but I figured I’d ask. I don’t have or even tried any reloader powder for any of my rifles. And yea the squirrel’s are trophy size! 🤣 I’m actually just tinkering around with it but I may take it coyote hunting. Thanks again and I will...

Hello all, I am new here and did my first hammer testing today. Rifle is a Remington 700 with a 1-12 twist. I used 3X fired Remington brass, CCI SRP and benchmark for initial testing and never hit pressure and already slightly compressed at 28.5 grains. Velocity was 3736 fps with the 28.5. The...

I don’t have any illusions that we are free but we are the most free country. For now.

I wouldn’t even want to guess at your velocity with this combination littlebighorn.

Thanks riceman