bjornf16
Well-known member
Can’t get factory “hot” 225 gr load to shoot well out of my 20” Browning BLR (12” twist), so bought some 200 gr HH to hand load.
Range day with H4198 using Hornady brass, Federal GM210M primers, COAL 2.808", Lee FCD light crimp:
Grains - MV
40.0 - 2443
40.5 - 2489
41.0 - 2497
41.5 - 2537
42.0 - 2544
42.5 - 2573
43.0 - 2600
43.5 - 2616
44.0 - 2650
44.5 - 2660
No pressure signs. I think I should retest with magnum primers.
Although MV = 2650 fps makes this a 400 yd capable hunting rig. So I might just load up a bunch at 44.2 gr and check accuracy.
I think I'm right at 99% case fill given my COAL of 2.808" with 44.2 grains (don't hear any crunching; fill looks to be close to my Mk.1 eyeball bullet base location.
2.810" is just about max for my magazine length with reliable feeding. Haven't measured how far from lands this is.
Back to the range for 100 yd testing at 44.2 gr H4198:
1. 2672 fps
2. 2651
3. 2658
4. 2667
5. 2650
Avg MV = 2660
ES = 22
SD = 9.9
Shot 4 thrown a little high. Overall 5 shot 1.2 MOA. First 3 shots all touching.
Good enough for hunting I reckon...
Range day with H4198 using Hornady brass, Federal GM210M primers, COAL 2.808", Lee FCD light crimp:
Grains - MV
40.0 - 2443
40.5 - 2489
41.0 - 2497
41.5 - 2537
42.0 - 2544
42.5 - 2573
43.0 - 2600
43.5 - 2616
44.0 - 2650
44.5 - 2660
No pressure signs. I think I should retest with magnum primers.
Although MV = 2650 fps makes this a 400 yd capable hunting rig. So I might just load up a bunch at 44.2 gr and check accuracy.
I think I'm right at 99% case fill given my COAL of 2.808" with 44.2 grains (don't hear any crunching; fill looks to be close to my Mk.1 eyeball bullet base location.
2.810" is just about max for my magazine length with reliable feeding. Haven't measured how far from lands this is.
Back to the range for 100 yd testing at 44.2 gr H4198:
1. 2672 fps
2. 2651
3. 2658
4. 2667
5. 2650
Avg MV = 2660
ES = 22
SD = 9.9
Shot 4 thrown a little high. Overall 5 shot 1.2 MOA. First 3 shots all touching.
Good enough for hunting I reckon...