Rounding out the line of 7mm HHT's

[Steve Davis]

We just finished two more .284 Cal Hammer HHT's. 153gr and 162gr. This rounds out the line of 7mm's.

.284 Cal-162gr Hammer HHT™ - Hammer Bullets

This Hammer HHT™ at 162gr will run in fast twist barrels of 1-8.6" or faster. You guys that are looking for a heavier option for your 7mm's, this will be a great option. With no issues of poor penetration on high velocity impacts and full deformation down to 1700 fps, this bullet will give...

hammerbullets.com

.284 Cal-153gr Hammer HHT™ - Hammer Bullets

This will be the heaviest 7mm Hammer HHT™ that will be fully stable in a 1-9" twist barrel. This will make a great combo for guys looking to stretch out their magnums and still keep a great max point blank range capability.

hammerbullets.com

Here is all of the Hammer HHT's that we currently have ready to go. More to come!

HHT™ Archives - Hammer Bullets

hammerbullets.com

 

[spokenfly]

Well, the choices just got harder! I was about to pull the trigger on an order of the 145hht for the 280AI, but that 153 has me second guessing my choice.

 

[Muddyboots]

Here is all of the Hammer HHT's that we currently have ready to go. More to come!

.277! Not giving up!

 

[agorman]

Just a box of the 153s. Should be a good do-it-all for my 7mm Rem Mag

 

[Snailz]

Given the popularity of the 30 cal 124 HH, I would think an offering in that weight class would tickle all the laser beam enthusiasts that seem to be in the forum.

 

[bodeen]

There is the .284 120HH

 

[Steve Davis]

Given the popularity of the 30 cal 124 HH, I would think an offering in that weight class would tickle all the laser beam enthusiasts that seem to be in the forum.

We will probably try it, but I am not sure we can get the HHT that light and have it expand properly at low vel.

 

[MLaird]

Just ordered a new benchmark barrel with an 8 twist for my 7RM. Those 153s might be the ticket.

 

[ButterBean]

I Love This Place

 

[Rausch]

How close are we on a .338 HHT that’s in the 220-235 grain range?

 

[Steve Davis]

How close are we on a .338 HHT that’s in the 220-235 grain range?

Tested them and they did not work as we want at low velocity. Back to the drawing board.

 

[HARPERC]

Tested them and they did not work as we want at low velocity. Back to the drawing board.

But they were beautiful!

 

[Rausch]

Tested them and they did not work as we want at low velocity. Back to the drawing board.

Any chance the next prototype could be tested and ready before fall? Or should I order more 235HH for this season?

 

[Steve Davis]

Any chance the next prototype could be tested and ready before fall? Or should I order more 235HH for this season?

Hang on. We got this!

 

[Rausch]

Thanks Steve!

 

[Beeman]

Tested them and they did not work as we want at low velocity. Back to the drawing board.

Glad you are working on the 338 in lighter weights. My 23” 338 RUM needs something in the 200-225 gr range. I will impatiently wait for their release.

 

[AKSam]

I’d love to see an HHT in the 175-200 range in 338 since we are making mid bore requests.

 

[Beeman]

I’d love to see an HHT in the 175-200 range in 338 since we are making mid bore requests.

A 175 HHT is one I forgot on my wish list. Be perfect for my new 338-06 AI build.

 

[Steve Davis]

I think this is going to take a larger tip with a larger hp to get them to work.

 

[AKSam]

I think this is going to take a larger tip with a larger hp to get them to work.

Would make sense that there is a tipping point where proportions get too far out of whack with a single size.