New .264 100gr HHT and 112gr HHT

[OutdoorEdventure]

New .264cal - 100gr HHT
Whether you are looking for more performance from your Grendel or a laser beam from your 6.5 PRC, this 100gr Hammer HHT™ will give you great performance form gophers to big game.


New .264cal - 112gr HHT
With a minimum required twist rate of 1-9.5″ this will be a great choice for the older .264’s that have factory barrel twist of 1-9″. Being able to run north of 3500 fps and having a bullet that can hold up to the demands of shooting big game, is a game changer! Calculated at 1000′ above sea level this would carry 1700 fps to 900y and have a max point blank range capability to 425y.

 

[KurtisB]

"max point blank range capability to 425y"

What's the target diameter used for this figure?

Almost makes me want to get a 6.5mm rifle.

 

[DaveM]

How do these compare to the 105AHT

 

[Modoc]

Time to add this one to the wish list. As if I didn’t have enough load development to do.

 

[les]

It is not fair!!!! 5 yes 5 HHT's for the 6.5 and ZERO for the 35 caliber. My Whelen is weeping for a 180-200 grain 35 Caliber HHT.

 

[OutdoorEdventure]

If you shot a man bun caliber there wouldn’t be any issues.

 

[jrebel]

That 100 grain HHT out of a 6.5 x 300 weatherby would be about as much fun as a grown man should have. (insert drool emoji here!!)

 

[riceman]

That 100 grain HHT out of a 6.5 x 300 weatherby would be about as much fun as a grown man should have. (insert drool emoji here!!)

Hmmm, may try that in both. 26n and my 6.5-300 zoom-zoom!!

 

[KurtisB]

I have been considering 6.5x55(maybe AI) or 6.5 WBY RPM. About the only 6.5s I'm interested in.

 

[choprzrul]

I have been considering 6.5x55(maybe AI) or 6.5 WBY RPM. About the only 6.5s I'm interested in.

6.5mm-06 A Square perhaps?

 

[KurtisB]

6.5mm-06 A Square perhaps?

It's all well down the road as far as builds go, so I'm not really set on anything. I'm got a 9.3x62 and a 25GT build lined up first.

Side note: Steve & Brian can build me a rifle?? Might be something I'd look into.

 

[Farleg]

It is not fair!!!! 5 yes 5 HHT's for the 6.5 and ZERO for the 35 caliber. My Whelen is weeping for a 180-200 grain 35 Caliber HHT.

Gday Les
The 358 will come
I have 338 to work out a few things that will give a idea of what’s going on
But for the 358 I’m sure it will marry it’s brother the 375 which has a 3mm tip in it & that one is only waiting for the tip mild to be finished & game on id say
Cheers

 

[Farleg]

"jrebel, post: 31489, member: 188"]
That 100 grain HHT out of a 6.5 x 300 weatherby would be about as much fun as a grown man should have.

Best I can do jrebel
Cheers

 

[Farleg]

If you shot a man bun caliber there wouldn’t be any issues.

Gday Ed just giving bean a few more thoughts
Cheers

 

[Farleg]

How do these compare to the 105AHT

Gday davem
Don’t know yet a couple hundred of ea are in transit
So the waiting game begins

Cheers

 

[Farleg]

"max point blank range capability to 425y"

What's the target diameter used for this figure?

Almost makes me want to get a 6.5mm rifle.

Gday kurtis b
x2
Cheers

 

[Farleg]

Gday Ed the title needs editing on this one
Cheers

 

[gltaylor]

On my 26 Sherman Mag, PBR is that or a touch more with 8" target and the 123 AH at 3810. (for reference)

 

[Beeman]

Gday Les
The 358 will come
I have 338 to work out a few things that will give a idea of what’s going on
But for the 358 I’m sure it will marry it’s brother the 375 which has a 3mm tip in it & that one is only waiting for the tip mild to be finished & game on id say
Cheers

Are these lighter weight offerings in 338 caliber? Larger hollow point if I remember right?

 

[Farleg]

Are these lighter weight offerings in 338 caliber? Larger hollow point if I remember right?

Gday beeman
Just failed the 202hht I have @ slightly over 2100
The new ones are being cut today
So weights I’m unsure but should come in around a 200 &220 weight & get these to work & the bigger ones (240 ish ) will be easier

Not long now

Cheers