G Gerald Dilgard Hammer Time Executive member Mar 7, 2024 #1 Anyone got some data or ideas for powder? Would like an accurate load with good speed. Don't need to set the grass on fire between me and the target.
Anyone got some data or ideas for powder? Would like an accurate load with good speed. Don't need to set the grass on fire between me and the target.
choprzrul Hammer Time Executive member Mar 7, 2024 #3 Here's the Easy Button for Hammer loads: https://sites.google.com/view/hbsha...rsZmHnoFtybZAvPdHfbdou2Bm_eZVukfEBcVicU&pli=1 30-06 with the 151 AH has data for Varget, N550, I4166, I4451, Big Game, SW Precision, and I4064.
Here's the Easy Button for Hammer loads: https://sites.google.com/view/hbsha...rsZmHnoFtybZAvPdHfbdou2Bm_eZVukfEBcVicU&pli=1 30-06 with the 151 AH has data for Varget, N550, I4166, I4451, Big Game, SW Precision, and I4064.
joe16 Hammer Time Executive member Mar 7, 2024 #4 I would not overlook one of the original 30-06 powders. IMR4895 Just sayin
riceman Hammer Time Executive member Mar 7, 2024 #5 Here's a start for you. Note, i started with wlrm primers. @ the bottom, switched to wlr primers and @54 gns, I added 104fps by going standard primers.
Here's a start for you. Note, i started with wlrm primers. @ the bottom, switched to wlr primers and @54 gns, I added 104fps by going standard primers.
Mountainman Hammer Time Executive member Mar 7, 2024 #6 62 grains of N550, 215M primer, 3.294 COAL, 1/4 crimp in top groove. 1/2" groups, 3300+ fps. This is a max load in a 26" barrel with a Serengeti chamber. Watch out for the grass PS: I would start about 59 grains
62 grains of N550, 215M primer, 3.294 COAL, 1/4 crimp in top groove. 1/2" groups, 3300+ fps. This is a max load in a 26" barrel with a Serengeti chamber. Watch out for the grass PS: I would start about 59 grains