It’s Beanmoors, 6.5 Beanmoor running 80 HHT!Ed
Don't be bashful tell us all about the load and the rifle.
80g HHT (with a crimp groove)It’s Beanmoors, 6.5 Beanmoor running 80 HHT!
I know you have your 7mm preference and I still think 7mm is the sweet spot. 7mmB.M.I to will echo the knowledgeable people on this forum, 6.5 Beanmore is just logical, or if you want something different, 6mm Beanmore?
Just a random thought.
Hi CBH, Yes I have been thinking about a 7mm Beanmore or a 7mm Mashburn Super Beanmore, by changing the neck angle and l would have to put the idea before the Beanmore creaters and see what other adjustments they would recommend/require to carry the Beanmore tag, an interesting thought.I know you have your 7mm preference and I still think 7mm is the sweet spot. 7mmB.M.
Hi Steve, would the 7mm Beanmore have a belted Magnum case? The study l've done, concluded that the 7mm Mashburn Super Magnum is a far superior design than the 7mm Rem Mag, wondering if we crossed the Mashburn with the Beanmore???I just ordered an 18" Proof in 7mm. It's getting screwed to a 307 short action and going in an MDT folding chassis stock. Easy button here is 7-08. Ive heard rumor that Sherman has something coming for the standard bolt face. Or we could get a 7mm BeanMore reamer.
Hi Steve, would the 7mm Beanmore have a belted Magnum case? The study l've done, concluded that the 7mm Mashburn Super Magnum is a far superior design than the 7mm Rem Mag, wondering if we crossed the Mashburn with the Beanmore???
Would appreciate your thoughts on this,
Regards
Graham
I don't have a magnum bolt face to work with.Hi Steve, would the 7mm Beanmore have a belted Magnum case? The study l've done, concluded that the 7mm Mashburn Super Magnum is a far superior design than the 7mm Rem Mag, wondering if we crossed the Mashburn with the Beanmore???
Would appreciate your thoughts on this,
Regards
Graham
Is there dies readily available for the SAW? Is it worth the effort?Hmmm. You could do a 7 SAW.
I think there are dies available.Is there dies readily available for the SAW? Is it worth the effort?
What's the case capacity of the 6.5 beanmore?80g HHT (with a crimp groove)
TAC@ 50.5g
LEE FCD@ 1/8th
.035 Neck Interference( expander removed)
I think someone makes them. I’ll do some checking. Factory brass is available from Alpha.Is there dies readily available for the SAW? Is it worth the effort?