Hammer Art

[WheelchairBear]

270wsm 117hh or 122hht
7rem 143hh or 145hht
300wby. 166hh or 168hht
This would be my choices, we are all different.
Some might go heavier with the 300wby.
Good luck and keep us updated.

Those look like good options, thanks, with Hammers I think 166 or 168 in the 300 would be very fast and flat, thanks.

 

[MeatBuck]

1 in 10, I am very confident shooting out to 400 yards and rarely shoot game past 550 but practice out to 800 just in case.
Thank you for your time and advice

I’d look at the 117g hh. Or the HHT equivalent.
Will have data on the 90 and 110 in the next couple weeks

 

[WheelchairBear]

Tell me about the 270 WSM please Sir as I am planning on building one as we speak

It is a stock Browning x-bolt SS white gold medalian 23" barrel, with a Leupold VX-3
It has been my go-to gun and seems to bring me good luck.
Factory Federal Premium loads give me 3380 FPS at 3500 ft elevation.
I would like to get up to 3500 fps and stay at 1 moa or better with Hammers

Tell me about the 270 WSM please Sir as I am planning on building one as we speak

 

[MeatBuck]

It is a stock Browning x-bolt SS white gold medalian 23" barrel, with a Leupold VX-3
It has been my go-to gun and seems to bring me good luck.
Factory Federal Premium loads give me 3380 FPS at 3500 ft elevation.
I would like to get up to 3500 fps and stay at 1 moa or better with Hammers

Shouldn’t be too difficult.
What have you got for powders?

 

[MeatBuck]

Lastly and not to nitpick but is the 1-10twist measured or advertised?
Best to measure if you haven’t.

 

[ButterBean]

It is a stock Browning x-bolt SS white gold medalian 23" barrel, with a Leupold VX-3
It has been my go-to gun and seems to bring me good luck.
Factory Federal Premium loads give me 3380 FPS at 3500 ft elevation.
I would like to get up to 3500 fps and stay at 1 moa or better with Hammers

Thank You Sir

 

[WheelchairBear]

Lastly and not to nitpick but is the 1-10twist measured or advertised?
Best to measure if you haven’t.

Good to know it is as advertised, I have never measured the twist in any of my guns. I will stick my scope in and check it out

 

[MeatBuck]

Good to know it is as advertised, I have never measured the twist in any of my guns. I will stick my scope in and check it out

Go to method. Take three or five measurements to get an average just in case the patch slips or something.