Bleeb
Well-known member
Holy smokes! That's pretty zippy and accurate! I'd say your goals were met.Finally got my S*** together today.
The rifle: Bergara B-14 HMR carbon 24 in barrel.
New ADG brass trimmed to 2.375 in. Ran through FL die with .312 neck bushing. Used federal 215 primers. Set neck tension to 0.003in
Measured jam at 3.342in set COAL to 3.320 in.
Used N560
62.0 gr. 2868 fps
63.0 2926 fps
64.0 2984 fps
65.0 3024 fps
66.0 3100 fps
67.0 3143 fps
68.0 3201 fps Slight ejector mark
Ran 3 more at 68 gr. 3218, 3215, 3212
Un able to see ejector mark on these 3.
Zeroed at 100 yds and set target to 200 yds
Shot 1.5 in low. Re-zeroed. First 2 shot 5/8 in 3rd I think I pulled. 3 shot at 200 yd 1.5 in. .75 moa not bad. 55 degrees. 3-10 mph wind left to right. 3700 ft elevation.
What primers? I managed to get a brick of Rem 9 1/2M, which have the mildest brisance of the mag primers, and I'm going to try them.